Neutrino Atlas
EN
  1. Terms
  2. Analysis & measurement
  3. Statistics & inference
  4. Systematic uncertainty
  5. Energy scale & nonlinearity

Energy scale & nonlinearity

ConceptLevel 4 of 4Also called: energy nonlinearity

The mapping from detector signal to true deposited energy, and its deviations from proportionality.

Scintillator quenching and Cherenkov contributions make the light yield nonlinear in energy. A mismatch of a fraction of a percent can mimic oscillation effects. JUNO requires better than 1% energy-scale knowledge for mass-ordering sensitivity.

In plain words

A detector does not measure energy directly. It counts photons or collects charge and then converts that signal into MeV. The energy scale is this conversion. If it is off by one percent, every event shifts by one percent, and features in the spectrum move with them. Nonlinearity means the conversion factor itself changes with energy, so that a 2 MeV electron does not give exactly twice the light of a 1 MeV electron.

Where the nonlinearity comes from

  • Quenching: in a scintillator densely ionising particles produce less light per unit energy, described by Birks' law. Low-energy electrons and especially protons and alpha particles are affected.
  • Cherenkov light: fast electrons also emit Cherenkov photons, which add a contribution that switches on above a threshold.
  • Electronics: the readout of large signals can saturate or respond nonlinearly to charge.

How it is calibrated

Experiments deploy radioactive sources with known gamma lines at many positions in the detector, use naturally occurring signals such as neutron captures and cosmogenic isotopes, and inject laser light to test the electronics. Super-Kamiokande uses an electron linear accelerator and a deuterium–tritium neutron generator for the same purpose. The results feed a model whose remaining uncertainty becomes a systematic uncertainty.

Why it matters

Reactor experiments read oscillations from the positions of maxima and minima in the spectrum. For JUNO, which aims to determine the mass ordering from the fine pattern of fast oscillations, the energy scale must be known to better than 1%, or a distorted scale could mimic the wrong ordering. Its small companion detector JUNO-TAO measures the unoscillated reactor spectrum with high resolution for comparison.

Frequently asked questions

Is energy scale the same as energy resolution?

No. The energy scale is the average conversion from signal to energy; energy resolution is the event-by-event spread around it. A detector can be precise but biased, or unbiased but blurry.

Why can a small scale error mimic oscillations?

Oscillation effects appear as shifts and distortions in the spectrum. A stretched or compressed energy axis produces similar shifts, so the two must be separated with calibration.

Related terms

Mentioned in 4 pages

Last updated: · Editorial standard

Cite this page

Text

Neutrino Atlas (2026). “Energy scale & nonlinearity”. Retrieved 22 November 2026, from https://neutrino-atlas.com/terms/energy-scale/

BibTeX

@misc{neutrinoatlas2026termsenergyscale,
  title        = {Energy scale & nonlinearity},
  author       = {{Neutrino Atlas}},
  year         = {2026},
  url          = {https://neutrino-atlas.com/terms/energy-scale/},
  note         = {Accessed 2026-11-22},
  language     = {english}
}