Neutrino Atlas
EN
  1. Terms
  2. Detection principles & detector technology
  3. Signal mechanisms
  4. Scintillation

Scintillation

ConfirmedLevel 3 of 4

Emission of light by a material excited by ionising radiation.

In organic liquid scintillators, charged particles excite molecules that de-excite by emitting UV light, which wavelength-shifting fluors convert to blue light that PMTs can detect. The yield is typically around 10,000 photons per MeV, roughly 50 times more than Cherenkov light, so low thresholds and good energy resolution are possible. Scintillation light is isotropic, so directional information is largely lost. Noble liquids such as argon and xenon also scintillate strongly in the vacuum ultraviolet.

In plain words

Some materials glow briefly when a charged particle passes through them. The particle bumps molecules into an excited state, and as they relax they release flashes of light. A scintillation detector is a large volume of such material, viewed by light sensors. Unlike Cherenkov light, the glow appears for any charged particle, however slow, and it is far brighter, which is why scintillators can see neutrinos of very low energy.

How it works

In an organic liquid scintillator, a solvent such as linear alkylbenzene (LAB) or pseudocumene absorbs the energy of the charged particle. The energy passes to a dissolved fluor such as PPO, which emits ultraviolet light, and often to a second wavelength shifter such as bis-MSB that moves the light into the blue, where photomultipliers are most sensitive. The emission takes only a few nanoseconds.

  • Light yield: of order 10,000 photons per MeV, roughly 50 times the Cherenkov yield.
  • Isotropic emission: the light spreads in all directions, so direction is largely lost.
  • Time profile: the slow component differs between electrons, alpha particles and neutrons, which allows pulse-shape discrimination.
  • Noble liquids: argon emits at 128 nm and xenon at 175 nm in the vacuum ultraviolet and need wavelength shifters.

Detectors that use it

Scintillation was the signal in the first neutrino detection by Cowan and Reines in 1956. Large liquid scintillator detectors include KamLAND (1,000 t), which measured reactor neutrino oscillations; Borexino (about 280 t), which measured pp, ⁷Be and CNO solar neutrinos; Daya Bay and RENO, which measured θ13; and JUNO with 20,000 t, designed for an energy resolution of about 3 % at 1 MeV to determine the mass ordering.

Strengths and weaknesses

The high light yield gives thresholds well below 1 MeV and good energy resolution, ideal for inverse beta decay and low-energy solar neutrinos. The price is the loss of direction and a strong sensitivity to radioactive impurities, which is why Borexino needed extreme purification. Densely ionising particles such as alpha particles produce less light per MeV, an effect described by Birks' law.

Frequently asked questions

What is the difference between scintillation and Cherenkov light?

Scintillation is emitted by excited molecules, for any charged particle, in all directions and with high yield. Cherenkov light is a shock-wave effect, emitted only above a speed threshold, faint but directional. Some new detectors try to record both.

Why are liquid scintillators used for reactor neutrinos?

They contain many free protons for inverse beta decay, give thresholds below the 1.8 MeV reaction threshold, and can be loaded with gadolinium to catch the neutron.

Original papers

  1. First resultR. Hofstadter, Alkali Halide Scintillation Counters, Phys. Rev. 74, 100 (1948)DOI 10.1103/PhysRev.74.100

Go deeper

Related terms

Mentioned in 67 pages

Last updated: · Editorial standard

Cite this page

Text

Neutrino Atlas (2026). “Scintillation”. Retrieved 22 November 2026, from https://neutrino-atlas.com/terms/scintillation/

BibTeX

@misc{neutrinoatlas2026termsscintillation,
  title        = {Scintillation},
  author       = {{Neutrino Atlas}},
  year         = {2026},
  url          = {https://neutrino-atlas.com/terms/scintillation/},
  note         = {Accessed 2026-11-22},
  language     = {english}
}