Silicon photomultiplier (SiPM)
A compact solid-state photon counter made of thousands of avalanche photodiode pixels in Geiger mode.
SiPMs offer high photon detection efficiency, insensitivity to magnetic fields and low voltage operation, but they have higher dark rates per area than PMTs. They read out the scintillation light in noble-liquid TPCs (DUNE photon detection, nEXO), in segmented scintillator detectors and in the JUNO-TAO near detector.
In plain words
A silicon photomultiplier is a chip the size of a fingernail covered with thousands of microscopic light detectors. Each one acts like a tiny mousetrap: a single photon springs it and it releases a fixed burst of charge. Counting how many traps fired tells you how many photons arrived. Because it is solid silicon running at a few dozen volts, it needs no vacuum and no high voltage, and it does not care about magnetic fields.
In detail
Each microcell, typically 10 to 100 µm across, is an avalanche photodiode biased a few volts above its breakdown voltage (Geiger mode). A photon that creates an electron–hole pair triggers a self-sustaining avalanche, which a series resistor then quenches. All cells are connected in parallel, so the output is the sum of identical single-cell pulses, which gives the SiPM its excellent photon-counting resolution. Gains are around 10⁶, similar to a PMT, and the photon detection efficiency reaches 20–50%.
The drawbacks are a high dark rate, typically 10⁵ to 10⁶ counts per second per mm² at room temperature, optical crosstalk between neighbouring cells, and small area per device. Cooling reduces the dark rate by orders of magnitude, which makes SiPMs natural partners for cryogenic liquids.
History
Geiger-mode multi-pixel devices were developed in the 1990s, largely by groups in Russia, and commercial versions such as Hamamatsu's MPPC followed in the 2000s. Neutrino physics was an early large customer: the T2K near detector ND280 uses about 64,000 MPPCs to read out plastic scintillator through wavelength-shifting fibres, the first use of these sensors on such a scale.
Where they are used
- Segmented scintillator and tracking calorimeters, such as the T2K near detectors.
- The photon detection system of DUNE, where SiPMs sit behind X-ARAPUCA light traps in liquid argon.
- Xenon TPCs for neutrinoless double beta decay such as nEXO, which plans large arrays of SiPMs sensitive to the 175 nm xenon light.
- JUNO-TAO, a small reactor detector beside the Taishan plant whose cooled SiPMs cover almost its entire surface for very high resolution.
Frequently asked questions
What does MPPC stand for?
Multi-Pixel Photon Counter, Hamamatsu's product name for its silicon photomultipliers. The two terms are often used interchangeably.
Why does JUNO's main detector not use SiPMs?
Covering a 35 m sphere with SiPMs would require an enormous number of channels and, at water temperature, would add far more dark noise than large PMTs. SiPMs pay off in the small, cooled TAO detector.
Original papers
- First resultP. Buzhan et al., Silicon photomultiplier and its possible applications, Nucl. Instrum. Meth. A 504, 48 (2003)DOI 10.1016/S0168-9002(03)00749-6
- ReviewD. Renker, Geiger-mode avalanche photodiodes, history, properties and problems, Nucl. Instrum. Meth. A 567, 48 (2006)
Mentioned in 13 pages
Last updated: · Editorial standard
Cite this page
Text
Neutrino Atlas (2026). “Silicon photomultiplier (SiPM)”. Retrieved 22 November 2026, from https://neutrino-atlas.com/terms/sipm/BibTeX
@misc{neutrinoatlas2026termssipm,
title = {Silicon photomultiplier (SiPM)},
author = {{Neutrino Atlas}},
year = {2026},
url = {https://neutrino-atlas.com/terms/sipm/},
note = {Accessed 2026-11-22},
language = {english}
}