Segmented scintillator tracking calorimeter
A detector made of many scintillator cells or bars that image particle tracks while measuring energy.
Splitting the scintillator into cells or strips, read out by wavelength-shifting fibres, combines tracking with calorimetry. NOvA's detectors use PVC cells filled with liquid scintillator, while MINOS used plastic strips interleaved with magnetised steel, allowing muon charge sign measurement.
In plain words
A single big tank of scintillator tells you how much energy was deposited, but not where. Cutting the scintillator into thousands of long thin cells, each with its own light readout, turns the detector into a 3D camera: the pattern of lit cells draws the particle tracks while the brightness still measures energy.
How it works
Each cell or strip contains a wavelength-shifting fibre that captures scintillation light and guides it to a photosensor at the end. Alternating the orientation of the cells layer by layer gives two views of every event, from which the tracks are reconstructed. This suits accelerator neutrinos of around 1 to 10 GeV, whose interactions produce muon tracks, electron showers and hadrons that must be told apart.
Examples
- MINOS (2005–2016): plastic scintillator strips 4.1 cm wide between magnetised steel plates; the far detector in the Soudan mine weighed 5.4 kilotonnes and measured the charge of muons.
- NOvA (since 2014): a 14-kilotonne far detector at Ash River, Minnesota, built from PVC cells about 4 × 6 cm in cross-section and 15.5 m long, filled with liquid scintillator. About two thirds of its mass is active.
- MINERvA: triangular plastic strips for precise cross-section measurements.
- T2K's upgraded near detector uses about two million 1 cm scintillator cubes, read in three directions.
Why it matters for neutrino physics
Low-density, finely segmented detectors keep electron showers long enough to distinguish them from π⁰ photons, which is essential for νe appearance. NOvA uses this to measure the mass ordering and CP phase. The design also scales cheaply, bridging huge homogeneous detectors and dense tracking calorimeters.
Frequently asked questions
Why is NOvA's detector built from plastic and not steel?
A low-density, mostly active detector samples electron showers finely, which helps separate νe signals from backgrounds.
What does the wavelength-shifting fibre do?
It absorbs blue scintillation light and re-emits it at longer wavelength inside the fibre, so the light is trapped and guided to the sensor.
Original papers
- MeasurementL. Aliaga et al. (MINERvA Collaboration), Design, calibration, and performance of the MINERvA detector, Nucl. Instrum. Meth. A 743, 130 (2014)DOI 10.1016/j.nima.2013.12.053
- MeasurementP.-A. Amaudruz et al. (T2K ND280 FGD Collaboration), The T2K fine-grained detectors, Nucl. Instrum. Meth. A 696, 1 (2012)
Related terms
Mentioned in 9 pages
Last updated: · Editorial standard
Cite this page
Text
Neutrino Atlas (2026). “Segmented scintillator tracking calorimeter”. Retrieved 22 November 2026, from https://neutrino-atlas.com/terms/segmented-scintillator/BibTeX
@misc{neutrinoatlas2026rmssegmentedscintillator,
title = {Segmented scintillator tracking calorimeter},
author = {{Neutrino Atlas}},
year = {2026},
url = {https://neutrino-atlas.com/terms/segmented-scintillator/},
note = {Accessed 2026-11-22},
language = {english}
}