Neutrino Atlas
EN
  1. Terms
  2. Detection principles & detector technology
  3. Detector technologies
  4. Cryogenic bolometers

Cryogenic bolometers

ConfirmedLevel 3 of 4Also called: cryogenic calorimeter, macrobolometer

Crystals cooled to millikelvin temperatures that measure particle energy as a tiny temperature rise.

Bolometers made of TeO₂ or Li₂MoO₄ contain the double-beta isotope (¹³⁰Te, ¹⁰⁰Mo) and achieve energy resolutions of a few keV at several MeV. Scintillating bolometers add a light channel to reject alpha backgrounds. CUORE operates about 1000 crystals at around 10 mK, and microcalorimeters are also used for holmium-163 electron-capture mass measurements (ECHo, HOLMES).

In plain words

A bolometer is a thermometer so sensitive that it can feel the heat of a single nuclear decay. At room temperature such a tiny amount of energy would vanish, but cooled to a hundredth of a degree above absolute zero, a crystal has almost no heat capacity left. A few MeV then warm it measurably, and the size of the temperature pulse gives the deposited energy with great precision.

In detail

ΔT = E / C, C ∝ (T / ΘD)³ΔT: temperature rise; E: deposited energy; C: heat capacity of the crystal, which in a dielectric falls with the cube of the temperature T relative to the Debye temperature ΘD.

The phonon signal is read by a sensor glued to the crystal, such as a neutron-transmutation-doped germanium thermistor or a superconducting transition-edge sensor. Because almost all the energy ends up as heat, regardless of particle type, bolometers achieve energy resolutions of a few keV at several MeV. Their weakness is speed: pulses last up to seconds, and the bolometer alone cannot tell an alpha particle from an electron.

Scintillating bolometers

Crystals such as lithium molybdate (Li₂MoO₄) also emit a little light. A second, thin bolometer facing the crystal measures that light; alphas produce much less of it than electrons, so surface alpha background can be rejected. This is the basis of CUPID.

Examples and results

  • CUORE at Gran Sasso: 988 tellurium dioxide crystals with a total mass of 742 kg, cooled to about 10 mK since 2017, searching for ¹³⁰Te decay at 2527 keV. In 2022 it reported a half-life limit above 2.2 × 10²⁵ years, raised to 3.5 × 10²⁵ years with more than two tonne-years in 2025.
  • CUPID will use enriched ¹⁰⁰Mo with a Q-value of 3034 keV, above most natural gamma lines.
  • ECHo and HOLMES use microcalorimeters to measure the holmium-163 electron-capture spectrum for the neutrino mass.
  • Gram-scale cryogenic detectors with thresholds of tens of eV target reactor CEvNS.

History

Ettore Fiorini and Tapio Niinikoski proposed low-temperature calorimeters for double beta decay in 1984, leading to a series of tellurium experiments at Gran Sasso that culminated in CUORE.

Frequently asked questions

How cold is CUORE?

About 10 millikelvin, maintained by one of the largest dilution refrigerators ever built, holding roughly a tonne of material at that temperature.

Why not use bolometers for every neutrino experiment?

They are slow, need large cryogenic systems and are limited to masses of about a tonne.

Original papers

  1. ProposalE. Fiorini, T. O. Niinikoski, Low-temperature calorimetry for rare decays, Nucl. Instrum. Meth. A 224, 83 (1984)
  2. MeasurementCUORE Collaboration, Search for Majorana neutrinos exploiting millikelvin cryogenics with CUORE, Nature 604, 53 (2022)DOI 10.1038/s41586-022-04497-4

Related terms

People

On the timeline

  1. 2022CUORE sets a tonne-scale bolometer limit
  2. 2025CUORE completes two tonne-years without a signal

Mentioned in 29 pages

Last updated: · Editorial standard

Cite this page

Text

Neutrino Atlas (2026). “Cryogenic bolometers”. Retrieved 22 November 2026, from https://neutrino-atlas.com/terms/bolometers/

BibTeX

@misc{neutrinoatlas2026termsbolometers,
  title        = {Cryogenic bolometers},
  author       = {{Neutrino Atlas}},
  year         = {2026},
  url          = {https://neutrino-atlas.com/terms/bolometers/},
  note         = {Accessed 2026-11-22},
  language     = {english}
}