Neutrino Atlas
EN
  1. Terms
  2. Detection principles & detector technology
  3. Signal mechanisms
  4. Phonon / heat signal

Phonon / heat signal

ConceptLevel 3 of 4

Measuring the tiny temperature rise caused by an energy deposit in a crystal cooled near absolute zero.

In a dielectric crystal at about 10 mK the heat capacity is so small that a few-MeV deposit raises the temperature measurably (tens to hundreds of µK). Thermistors or transition-edge sensors read this out, giving excellent energy resolution that is almost independent of the particle type. This principle underlies cryogenic bolometers such as CUORE.

In plain words

Drop a hot pebble into a large bathtub and the water temperature does not change measurably. Drop it into a thimble of water and it does. Phonon detectors make the thimble as small as possible in a thermal sense: they cool a crystal to a few thousandths of a degree above absolute zero, where its capacity to store heat almost vanishes. A single particle interaction then warms the crystal by a measurable amount, and a sensitive thermometer records the tiny rise.

In detail

The temperature rise is the deposited energy divided by the heat capacity. For a dielectric crystal far below its Debye temperature, the heat capacity falls with the cube of temperature, so cooling from 1 K to 10 mK reduces it a millionfold.

ΔT = E / C(T), C ∝ (T / ΘD)³ΔT: temperature rise; E: deposited energy; C: heat capacity; T: operating temperature; ΘD: Debye temperature of the crystal.

Neutron-transmutation-doped (NTD) germanium thermistors or superconducting transition-edge sensors (TES) read out the rise. Some sensors catch the high-energy athermal phonons before they thermalise, which is faster and gives position information.

Strengths

  • Energy resolution: nearly the whole energy ends up as heat, so the resolution can be far better than for light.
  • No quenching: nuclear recoils and electrons of equal energy give almost equal heat signals, unlike scintillation (quenching).
  • Low thresholds: small crystals reach some tens of eV, important for CEvNS and dark matter.
  • Particle identification: adding a light or charge channel distinguishes alpha particles from electrons.

Detectors that use it

Ettore Fiorini proposed cryogenic bolometers for double beta decay searches in the 1980s. CUORE at Gran Sasso operates 988 tellurium dioxide crystals of 750 g each at about 10 mK, 741 kg in total, with an energy resolution of several keV (about 0.3 %) at 2.5 MeV. Its successor CUPID adds light readout. Small cryogenic detectors are also used for reactor CEvNS and in dark matter searches, see bolometers.

Limitations

The signals are slow (milliseconds to seconds), so rates must be low, and large masses require many separate crystals inside a big dilution refrigerator.

Frequently asked questions

How cold must a bolometer be?

Typically around 10 mK. At this temperature the heat capacity of a crystal of hundreds of grams is small enough that an MeV deposit raises it by of order 0.1 mK, which thermistors can measure.

What is the difference between a phonon and a heat signal?

Phonons are the lattice vibrations themselves. Thermal sensors measure them after they have spread into an equilibrium temperature rise, while athermal sensors catch them earlier.

Original papers

  1. ProposalE. Fiorini, T. O. Niinikoski, Low-temperature calorimetry for rare decays, Nucl. Instrum. Meth. A 224, 83 (1984)

Related terms

Mentioned in 10 pages

Last updated: · Editorial standard

Cite this page

Text

Neutrino Atlas (2026). “Phonon / heat signal”. Retrieved 22 November 2026, from https://neutrino-atlas.com/terms/phonon-heat-signal/

BibTeX

@misc{neutrinoatlas2026termsphononheatsignal,
  title        = {Phonon / heat signal},
  author       = {{Neutrino Atlas}},
  year         = {2026},
  url          = {https://neutrino-atlas.com/terms/phonon-heat-signal/},
  note         = {Accessed 2026-11-22},
  language     = {english}
}