Acoustic neutrino detection
Detecting ultra-high-energy neutrinos through the faint sound pulse their particle cascades create in water or ice.
A cascade above about 10¹⁸ eV deposits energy in a thin cylinder within microseconds; the local heating expands the medium and emits a bipolar pressure pulse peaking near 10–20 kHz. Sound at these frequencies travels a few kilometres in sea water, so sparse hydrophone arrays could monitor very large volumes. Test arrays include AMADEUS in ANTARES (36 sensors, from 2007) and SPATS at the South Pole, which measured an acoustic attenuation length of only about 300 m in ice.
In plain words
When an extremely energetic neutrino interacts in water, the particle shower it creates heats a pencil-shaped region by a tiny fraction of a degree in a few microseconds. The heated water expands suddenly and sends out a short 'click', a sound wave that can be picked up by underwater microphones (hydrophones) hundreds of metres to kilometres away. Because sound travels far in the deep sea, a few sensors per cubic kilometre might in principle watch an enormous volume.
In detail
The thermo-acoustic model, worked out by Gurgen Askaryan and by John Learned in 1979, predicts a bipolar pressure pulse lasting some tens of microseconds. The sound is emitted mainly perpendicular to the cascade axis, in a thin 'pancake' a few degrees wide, and its amplitude grows with the deposited energy. The signal is tiny: a 2 EeV cascade gives roughly 20 mPa at 200 m. Detection therefore requires quiet sites, good knowledge of ambient noise from waves, shipping and marine animals, and filters that recognise the characteristic bipolar shape.
Test arrays
- SAUND used a US Navy hydrophone array in the Bahamas to set early flux limits.
- AMADEUS, integrated into ANTARES off Toulon, ran 36 acoustic sensors in six clusters from December 2007 and studied deep-sea noise and source direction finding.
- ACoRNE used a military array off Scotland, and acoustic modules were also tested at the NEMO and Lake Baikal sites.
- SPATS, deployed in IceCube boreholes, found an attenuation length of about 300 m in South Pole ice, roughly ten times shorter than predicted.
Why it matters for neutrino physics
Acoustic detection is one of two techniques, alongside radio detection, proposed for the very sparse flux of ultra-high-energy neutrinos, including cosmogenic neutrinos from cosmic-ray interactions. The SPATS result shifted attention in ice toward radio, while in water the long reach of sound keeps the method attractive. Sensors added to optical telescopes such as KM3NeT also serve to calibrate the positions of the optical modules.
Frequently asked questions
Has any neutrino been detected acoustically?
No. Test arrays have characterised noise and set upper limits, but the expected flux at EeV energies is far below what existing arrays can reach.
Why is the threshold so high?
The pressure pulse scales with deposited energy and must stand out against natural sea noise. Only cascades of roughly 10¹⁸ eV or more produce signals detectable at useful distances.
Original papers
- TheoryJ. G. Learned, Acoustic radiation by charged atomic particles in liquids: An analysis, Phys. Rev. D 19, 3293 (1979)DOI 10.1103/PhysRevD.19.3293
Related terms
- Ultra-high-energy neutrinos
- Radio (askaryan) detection
- Cosmogenic neutrinos
- ANTARES
- Cascade (shower) events
Mentioned in 1 page
People 1
Last updated: · Editorial standard
Cite this page
Text
Neutrino Atlas (2026). “Acoustic neutrino detection”. Retrieved 22 November 2026, from https://neutrino-atlas.com/terms/acoustic-detection/BibTeX
@misc{neutrinoatlas2026termsacousticdetection,
title = {Acoustic neutrino detection},
author = {{Neutrino Atlas}},
year = {2026},
url = {https://neutrino-atlas.com/terms/acoustic-detection/},
note = {Accessed 2026-11-22},
language = {english}
}