Neutrino Atlas
EN
  1. Terms
  2. Detection principles & detector technology
  3. Detector technologies
  4. Liquid scintillator detector

Liquid scintillator detector

ConfirmedLevel 3 of 4Also called: LS, LAB scintillator

A large volume of organic liquid that glows when charged particles pass, viewed by photomultipliers.

Solvents such as pseudocumene or linear alkylbenzene (LAB), doped with fluors like PPO, give high light yield and so thresholds well below 1 MeV and good energy resolution. They are the standard for reactor antineutrinos (KamLAND, Daya Bay, JUNO) and low-energy solar neutrinos (Borexino). Extreme radiopurity is required for solar physics. Loading with Gd, Te or Xe extends the physics reach.

Four ways to detect neutrinosFour schematic detectors: a water Cherenkov tank with a light cone, a liquid-scintillator sphere with isotropic light, a liquid-argon time projection chamber with drifting electrons, and strings of light sensors in ice.Water Cherenkovcone of light → ring; direction, flavourLiquid scintillatorbright, isotropic light; low thresholdsLiquid-argon TPCionisation drifts to wires; 3D imagesIce / water telescopesensor strings in km³; high energieselectric field → drift
Water Cherenkov detectors such as Super-Kamiokande see the cone of light from fast charged particles as a ring on the wall. Liquid scintillators such as Borexino, KamLAND and JUNO glow much more brightly and can see lower energies, but the light carries no direction. Liquid-argon time projection chambers such as ICARUS, MicroBooNE and DUNE record the ionisation tracks in three dimensions like a digital bubble chamber. Neutrino telescopes such as IceCube and KM3NeT instrument a cubic kilometre of natural ice or sea water. Schematic.

In plain words

Some organic liquids glow when a charged particle passes through them, much like a glow stick lit from the inside. The light is tens of times brighter than Cherenkov light and is produced even by slow particles. A large sphere of such liquid, surrounded by light sensors, can therefore see neutrino interactions that deposit less than a million electronvolts.

How the detector works

A charged particle excites the aromatic solvent molecules, which pass the energy to a dissolved fluor such as PPO; the fluor emits ultraviolet-blue light in a few nanoseconds, sometimes shifted further by a second dye to match the photomultipliers. Typical yields are around 10,000 photons per MeV. Solvents in use include pseudocumene (Borexino) and linear alkylbenzene, LAB, which is less toxic and has a higher flash point (Daya Bay, SNO+, JUNO).

For reactor antineutrinos the key signal is inverse beta decay: a prompt positron flash and a delayed neutron capture. Pulse-shape discrimination distinguishes alpha particles from electrons, and quenching reduces the light from heavily ionising particles.

Examples and key results

  • 1956: Cowan and Reines detected the neutrino with water targets sandwiched between liquid scintillator tanks.
  • 2002: KamLAND, with 1000 tonnes, observed reactor antineutrino disappearance; in 2005 it reported the first geoneutrinos.
  • 2007–2020: Borexino measured ⁷Be, pep, pp and CNO solar neutrinos one after another.
  • 2012: Daya Bay and RENO measured the mixing angle θ₁₃.
  • 2025: JUNO, with 20,000 tonnes of LAB, began data taking on 26 August and released first oscillation results in November.

Strengths and limits

High light yield gives low thresholds and good energy resolution; JUNO aims for about 3 % at 1 MeV. Scintillation light is emitted in all directions, so direction is largely lost, although Borexino showed that the early Cherenkov photons can be used statistically. Because natural radioactivity sits in the same energy range as the signal, solar experiments need extreme radiopurity, with uranium and thorium contamination below 10⁻¹⁸ grams per gram. Dissolving gadolinium, tellurium or xenon turns the scintillator into a neutron catcher or a double beta decay source, as in SNO+ and KamLAND-Zen.

Frequently asked questions

What is the difference between scintillation and Cherenkov light?

Scintillation is emitted by excited molecules in all directions and needs no minimum speed; Cherenkov light is a directional shock wave emitted only above a speed threshold. Scintillators give more light, Cherenkov detectors give direction.

Why is radiopurity so important?

Below a few MeV, decays of uranium, thorium, potassium and radon in the liquid produce signals that look like neutrino events. Only extreme purification makes rare solar neutrino signals visible.

Original papers

  1. First resultG. T. Reynolds, F. B. Harrison, G. Salvini, Liquid Scintillation Counters, Phys. Rev. 78, 488 (1950)DOI 10.1103/PhysRev.78.488
  2. MeasurementG. Alimonti et al. (Borexino Collaboration), The Borexino detector at the Laboratori Nazionali del Gran Sasso, Nucl. Instrum. Meth. A 600, 568 (2009)DOI 10.1016/j.nima.2008.11.076

Go deeper

Related terms

People

On the timeline

  1. 2007Borexino measures beryllium-7 solar neutrinos in real time
  2. 2025JUNO begins data taking

Mentioned in 76 pages

Last updated: · Editorial standard

Cite this page

Text

Neutrino Atlas (2026). “Liquid scintillator detector”. Retrieved 22 November 2026, from https://neutrino-atlas.com/terms/liquid-scintillator/

BibTeX

@misc{neutrinoatlas2026termsliquidscintillator,
  title        = {Liquid scintillator detector},
  author       = {{Neutrino Atlas}},
  year         = {2026},
  url          = {https://neutrino-atlas.com/terms/liquid-scintillator/},
  note         = {Accessed 2026-11-22},
  language     = {english}
}