Neutrino Atlas
EN
  1. Terms
  2. Experiments & detectors
  3. Solar neutrino experiments
  4. SNO+

SNO+

ConfirmedLevel 3 of 4Also called: SNO plus

The successor to SNO, refilled with liquid scintillator for double beta decay, solar, reactor and geoneutrino physics.

SNO+ replaces the heavy water with about 780 tonnes of LAB scintillator. It plans to load tellurium to search for neutrinoless double beta decay of ¹³⁰Te. Water-phase and scintillator-phase data have produced reactor antineutrino oscillation and solar measurements.

In plain words

When SNO finished, its underground cavity, acrylic sphere and photomultipliers were still in excellent condition. SNO+ reuses them but replaces the heavy water with a liquid that glows when charged particles pass through it. A scintillator produces far more light than Cherenkov radiation in water, so the detector can see much lower energies and measure them more precisely. The main goal is to search for an extremely rare nuclear decay that would show whether neutrinos are their own antiparticles.

How the detector works

The detector sits about 2 kilometres underground at SNOLAB near Sudbury, one of the deepest laboratories in the world. The 12-metre acrylic vessel now holds about 780 tonnes of liquid scintillator based on linear alkylbenzene (LAB) with the fluor PPO, viewed by about 9300 photomultipliers. Because the scintillator is lighter than the surrounding water, a new rope net holds the vessel down. Mark Chen leads the experiment.

Phases and results

  • Water phase (2017–2019): the vessel was filled with ultra-pure water. SNO+ made the first observation of reactor antineutrinos in pure water, measured the ⁸B solar flux, and set limits on invisible nucleon decay.
  • Scintillator phase (filling completed in 2022): with a low energy threshold, SNO+ studies reactor antineutrinos from Canadian and US reactors, which allowed an initial measurement of reactor antineutrino oscillation, as well as geoneutrinos and low-energy solar neutrinos.
  • Tellurium phase (next major step): natural tellurium, at an initial loading of 0.5 per cent or about 3.9 tonnes, will be dissolved in the scintillator.
¹³⁰Te → ¹³⁰Xe + 2e⁻ (Q = 2.527 MeV)[Neutrinoless double beta decay](term:neutrinoless-double-beta-decay) of ¹³⁰Te would appear as a peak at the Q-value; ¹³⁰Te makes up about 34 per cent of natural tellurium.

Why it matters for neutrino physics

The initial tellurium loading aims at a half-life sensitivity of about 2 × 10²⁶ years, with higher concentrations planned later. Natural tellurium needs no costly isotope enrichment, which makes large loadings affordable. SNO+ is also part of the SNEWS supernova alert network.

Frequently asked questions

Is SNO+ the same detector as SNO?

It reuses SNO's cavity, acrylic vessel and photomultipliers, but with a new target liquid, new electronics and a hold-down system, so it is a new experiment with a different physics programme.

Why tellurium?

¹³⁰Te is a double-beta isotope with a high natural abundance and a reasonably high Q-value, so large amounts can be loaded without enrichment.

Original papers

  1. ProposalV. Albanese et al. (SNO+ Collaboration), The SNO+ experiment, JINST 16, P08059 (2021)DOI 10.1088/1748-0221/16/08/P08059arXiv:2104.11687
  2. First resultA. Allega et al. (SNO+ Collaboration), Evidence of Antineutrinos from Distant Reactors using Pure Water at SNO+, Phys. Rev. Lett. 130, 091801 (2023)DOI 10.1103/PhysRevLett.130.091801arXiv:2210.14154

Related terms

Latest research on this topic

Latest research

Mentioned in 25 pages

Last updated: · Editorial standard

Cite this page

Text

Neutrino Atlas (2026). “SNO+”. Retrieved 22 November 2026, from https://neutrino-atlas.com/terms/sno-plus/

BibTeX

@misc{neutrinoatlas2026termssnoplus,
  title        = {SNO+},
  author       = {{Neutrino Atlas}},
  year         = {2026},
  url          = {https://neutrino-atlas.com/terms/sno-plus/},
  note         = {Accessed 2026-11-22},
  language     = {english}
}