Neutrino Atlas
EN
  1. Terms
  2. Detection principles & detector technology
  3. Event reconstruction & identification
  4. Energy threshold

Energy threshold

ConceptLevel 3 of 4

The lowest energy at which a detector can register or reliably select neutrino events.

Thresholds can be physical (a reaction threshold, such as 1.8 MeV for inverse beta decay or 233 keV for gallium), optical (the Cherenkov threshold) or practical (set by radioactive background and electronic noise). The threshold determines which parts of a source spectrum, for example which solar neutrino branches, can be observed.

In plain words

Every detector has a hearing limit. Below a certain energy, a neutrino either cannot trigger the reaction the detector relies on, or it does trigger it but the resulting signal is too faint to stand out from noise and radioactivity. That limit is the energy threshold, and it decides which neutrinos an experiment can see at all.

Three kinds of threshold

  • Physical. Some reactions need a minimum neutrino energy because the final state is heavier than the initial state. Inverse beta decay on protons needs 1.806 MeV; capture on chlorine-37 needs 0.814 MeV; capture on gallium-71 needs only 0.233 MeV.
  • Optical. Cherenkov light is emitted only when a charged particle moves faster than light in the medium. In water an electron needs a kinetic energy of about 0.26 MeV; in practice far more is needed to produce enough photons.
  • Practical. Radioactivity, dark noise and electronics define the lowest energy at which events can be selected cleanly. This is usually the highest of the three and improves with cleaner materials and better photocathode coverage.

Example

Solar neutrino detectors show how thresholds shape physics. The chlorine experiment at Homestake saw mainly ⁸B and ⁷Be neutrinos. The gallium experiments SAGE and GALLEX were the first to reach the dominant pp neutrinos, whose energies end at 0.42 MeV. Super-Kamiokande measures ⁸B neutrinos in real time down to a recoil-electron kinetic energy of about 3.5 MeV, limited by radioactivity and spallation. Borexino, with its ultrapure scintillator, analysed data from about 0.19 MeV and measured ⁷Be, pep, CNO and pp neutrinos individually.

In detail

A threshold is rarely a sharp step. Near it, the detection efficiency rises gradually from zero to its plateau, because of finite energy resolution. Analyses therefore model the efficiency curve with calibration sources and often place the analysis threshold somewhat above the trigger threshold, where the efficiency is well understood.

Why it matters for neutrino physics

Lower thresholds open new physics: the MSW transition in the solar spectrum between about 1 and 5 MeV, geoneutrinos just above the IBD threshold, and CEvNS, whose nuclear recoils carry only kiloelectronvolts.

Frequently asked questions

Why can't gallium detectors measure energy?

Radiochemical detectors only count the atoms produced. They integrate over every neutrino above their physical threshold, so they give a rate but no spectrum.

Is the trigger threshold the same as the energy threshold?

Not necessarily. The trigger threshold is set in hardware or software for recording data. The analysis threshold is usually higher, chosen where backgrounds are manageable and efficiency is well known.

Related terms

Mentioned in 42 pages

Last updated: · Editorial standard

Cite this page

Text

Neutrino Atlas (2026). “Energy threshold”. Retrieved 22 November 2026, from https://neutrino-atlas.com/terms/energy-threshold/

BibTeX

@misc{neutrinoatlas2026termsenergythreshold,
  title        = {Energy threshold},
  author       = {{Neutrino Atlas}},
  year         = {2026},
  url          = {https://neutrino-atlas.com/terms/energy-threshold/},
  note         = {Accessed 2026-11-22},
  language     = {english}
}