Coincidence / Delayed-signal technique
Requiring two correlated signals, close in space and time, to identify an event and reject random backgrounds.
In inverse beta decay a prompt positron is followed by a delayed neutron capture. Requiring both within about 1 ms and about 1 m suppresses uncorrelated radioactivity by orders of magnitude. Similar tags include the Bi–Po coincidences used for radiopurity assays and the muon → Michel electron sequence.
In plain words
One knock on the door could be anything. Two knocks, a precise interval apart, are almost certainly a visitor who knows the code. The coincidence technique applies this logic to particle detectors: instead of accepting single flashes, it demands two signals that belong together, close in time and position.
In detail
The power of the method comes from simple probability. If uncorrelated events of the first type occur at rate R₁ and of the second type at rate R₂, the rate of accidental pairs within a time window Δt is small whenever the window is short.
A spatial requirement, for example that both signals lie within about a metre, suppresses accidentals further. Correlated backgrounds, in which one physical process produces both signals, are not reduced this way and must be handled separately.
Where it is used
- Inverse beta decay: a prompt positron followed by a delayed neutron capture, the signature of every reactor antineutrino experiment. The details of this case are described under delayed coincidence and neutron tagging.
- Bi–Po tagging: ²¹⁴Bi decays to ²¹⁴Po, which emits an alpha particle with a half-life of 164 µs; ²¹²Bi–²¹²Po pairs follow within about 0.3 µs. Counting these pairs measures uranium and thorium contamination inside the detector, a key tool against radioactive background.
- Muon decay: a stopping muon followed within microseconds by its Michel electron identifies muons and charged pions.
- Spallation vetoes: correlating candidate events with a preceding muon and its neutrons, as in Borexino's threefold coincidence against ¹¹C.
History
Frederick Reines and Clyde Cowan used exactly this idea in 1956 at the Savannah River reactor. Their water target contained dissolved cadmium chloride, and scintillator tanks recorded the positron's annihilation gamma rays followed, a few microseconds later, by gamma rays from neutron capture on cadmium. The delayed pair turned an impossibly rare signal into the first detection of the neutrino.
Why it matters for neutrino physics
Coincidence tagging made reactor neutrino physics possible, from Cowan and Reines to KamLAND, Daya Bay and JUNO, and it lets low-background experiments measure their own contamination atom by atom.
Frequently asked questions
How is this different from the delayed-coincidence entry?
That entry describes the specific inverse beta decay signature. This one describes the general technique, which also covers radioactive decay chains, muon decays and spallation vetoes.
Why are correlated backgrounds so dangerous?
Because they reproduce the full prompt–delayed pattern. Fast neutrons and ⁹Li decays, for example, produce real pairs and pass the coincidence cut, so they must be estimated from their own signatures.
Original papers
- DiscoveryC. L. Cowan, F. Reines, F. B. Harrison, H. W. Kruse and A. D. McGuire, Detection of the Free Neutrino: a Confirmation, Science 124, 103 (1956)DOI 10.1126/science.124.3212.103
Go deeper
- Neutron taggingIdentifying the neutron emitted in an interaction through its delayed capture gamma.
- Michel electronThe electron from a stopped muon's decay, used to tag muons and pions.
Related terms
Mentioned in 11 pages
Last updated: · Editorial standard
Cite this page
Text
Neutrino Atlas (2026). “Coincidence / Delayed-signal technique”. Retrieved 22 November 2026, from https://neutrino-atlas.com/terms/coincidence-delayed-signal/BibTeX
@misc{neutrinoatlas2026coincidencedelayedsignal,
title = {Coincidence / Delayed-signal technique},
author = {{Neutrino Atlas}},
year = {2026},
url = {https://neutrino-atlas.com/terms/coincidence-delayed-signal/},
note = {Accessed 2026-11-22},
language = {english}
}