Neutrino Atlas
EN
  1. Terms
  2. Detection principles & detector technology
  3. Event reconstruction & identification
  4. Trigger & data acquisition

Trigger & data acquisition

ConceptLevel 3 of 4Also called: DAQ

The real-time decision system that selects which detector activity is recorded.

Triggers typically require a number of coincident PMT hits or a charge sum above threshold within a time window, or they are tied to the beam spill timing at accelerators. Supernova triggers watch for rate bursts. Modern detectors increasingly record continuously with software triggers.

In plain words

A large detector produces a never-ending stream of small signals, most of them noise. Recording everything at full detail was long impossible. The trigger is the gatekeeper that watches this stream in real time and says yes whenever the pattern looks like a real physical event, so that the data acquisition system (DAQ) saves it.

In detail

The classic trigger in a light-based detector is a multiplicity condition: at least N sensors must fire within a short window, typically a few hundred nanoseconds, or the summed charge must exceed a threshold. Because random dark counts also produce hits, N is set just above the level reached by chance. Many detectors run several triggers at once with different thresholds, each feeding a different analysis.

  • Beam triggers. At accelerators, the detector only needs to listen during the microsecond-long spills of the neutrino beam, identified by timing signals from the accelerator. This cuts cosmic backgrounds by orders of magnitude.
  • Neutrino telescopes. IceCube uses a simple multiplicity trigger requiring eight optical modules with locally coincident hits within 5 µs; most of what it records is atmospheric muons.
  • Supernova triggers. A galactic supernova would produce thousands of events in a few seconds. Detectors watch for a sudden rise in the event rate and send alerts to SNEWS.

The move to software

Modern detectors increasingly digitise everything and decide later. Super-Kamiokande's electronics, upgraded in 2008, record every PMT hit and apply triggers in software, which lowered its threshold and made it possible to look for the 2.2 MeV gamma from neutron capture in a long window after each event. JUNO and DUNE also rely on high-bandwidth readout with software selection; DUNE buffers its data so that a supernova trigger can save many seconds of activity, including the time just before the trigger fired.

Why it matters for neutrino physics

An event that is not triggered is lost forever. The trigger efficiency near threshold has to be measured, usually with calibration sources and random triggers, and becomes part of the detection efficiency. Trigger design also sets dead time and data volume, both of which limit the exposure an experiment can collect.

Frequently asked questions

What is a random trigger?

A trigger that fires at fixed intervals regardless of detector activity. It samples noise and pile-up conditions, which are needed to understand accidental backgrounds and efficiencies.

Why not just record everything?

More and more experiments do, but a large detector can produce gigabytes per second. Keeping everything is costly in storage and processing, so some selection is almost always applied before permanent storage.

Mentioned in 3 pages

Last updated: · Editorial standard

Cite this page

Text

Neutrino Atlas (2026). “Trigger & data acquisition”. Retrieved 22 November 2026, from https://neutrino-atlas.com/terms/trigger/

BibTeX

@misc{neutrinoatlas2026termstrigger,
  title        = {Trigger & data acquisition},
  author       = {{Neutrino Atlas}},
  year         = {2026},
  url          = {https://neutrino-atlas.com/terms/trigger/},
  note         = {Accessed 2026-11-22},
  language     = {english}
}