Neutrino Atlas
EN
  1. Terms
  2. Detection principles & detector technology
  3. Photodetection
  4. Photomultiplier tube (PMT)
  5. Quantum efficiency

Quantum efficiency

ConceptLevel 4 of 4Also called: QE, photon detection efficiency

The probability that a photon hitting the photocathode produces a photoelectron.

Typical bialkali photocathodes reach about 25–35% peak quantum efficiency near 400 nm. Combined with the collection efficiency onto the first dynode, it gives the photon detection efficiency, which sets the photoelectron yield and therefore energy resolution.

In plain words

Not every photon that reaches a light sensor is counted. Quantum efficiency is the sensor's hit rate: a value of 30% means that, on average, three out of ten photons knock out an electron that starts a signal. The other seven are reflected, pass through the photocathode or are absorbed without releasing an electron.

In detail

Quantum efficiency (QE) depends strongly on wavelength. Bialkali photocathodes peak in the blue near 400 nm and fall off towards green and ultraviolet, which conveniently matches the emission of most liquid scintillators and the blue end of Cherenkov light. What matters in practice is the photon detection efficiency (PDE), which also includes the probability that the photoelectron actually reaches the first dynode and is amplified.

PDE = QE × CEPDE: photon detection efficiency; QE: quantum efficiency; CE: collection efficiency onto the first dynode or channel plate

For silicon photomultipliers the equivalent figure is the PDE directly, which also includes the fill factor of the active cells and the probability of triggering an avalanche.

In numbers

In the mass tests of the 20-inch PMTs for JUNO, the Hamamatsu dynode tubes averaged a QE of about 30% at 420 nm, and the tubes chosen for the central detector reached a mean PDE of about 30%. Hyper-Kamiokande's new box-and-line tubes gain mainly through better collection efficiency, roughly doubling the overall detection efficiency of the older Super-Kamiokande design.

Why it matters for neutrino physics

The number of detected photoelectrons per MeV scales directly with PDE, and the statistical part of the energy resolution scales as one over the square root of that number. A few percentage points of QE therefore translate into a visibly sharper spectrum, which is essential for JUNO's mass ordering measurement.

Frequently asked questions

Is quantum efficiency the same as detection efficiency?

No. QE only counts photoelectrons released from the cathode. The detection efficiency also includes whether that electron is collected and amplified, and for a whole detector the photocathode coverage and light losses in the medium.

Mentioned in 7 pages

Last updated: · Editorial standard

Cite this page

Text

Neutrino Atlas (2026). “Quantum efficiency”. Retrieved 22 November 2026, from https://neutrino-atlas.com/terms/quantum-efficiency/

BibTeX

@misc{neutrinoatlas2026termsquantumefficiency,
  title        = {Quantum efficiency},
  author       = {{Neutrino Atlas}},
  year         = {2026},
  url          = {https://neutrino-atlas.com/terms/quantum-efficiency/},
  note         = {Accessed 2026-11-22},
  language     = {english}
}