Neutrino Atlas
EN
  1. Terms
  2. Experiments & detectors
  3. Short-baseline & Sterile-neutrino searches
  4. SoLid

SoLid

ConfirmedLevel 3 of 4Also called: SoLid experiment, Search for oscillation with a ⁶Li detector

Very-short-baseline reactor experiment at Belgium's BR2 reactor using 12,800 plastic-scintillator cubes with ⁶LiF:ZnS neutron screens.

Cooling towers of the BR2 reactor in Mol
The BR2 research reactor at SCK CEN in Mol, Belgium, where SoLid took data from 2018 to 2020.Image: Michael Weinold · CC BY-SA 4.0 · commons.wikimedia.org

SoLid's 1.6 t detector consists of 12,800 polyvinyltoluene cubes, 5 cm on a side, each paired with a ⁶LiF:ZnS(Ag) sheet that tags the inverse-beta-decay neutron. Placed 6.3–8.9 m from the BR2 research reactor at SCK CEN in Mol, it took data from 2018 to 2020. Its first oscillation analysis (2024) found no significant sterile-neutrino signal and disfavoured part of the reactor-anomaly region.

In plain words

Like STEREO and PROSPECT, SoLid searched for a sterile neutrino by watching how the antineutrino spectrum changes over a few metres near a compact research reactor. What sets it apart is its construction: instead of a tank of liquid, the detector is a three-dimensional stack of small plastic cubes, each able to say where a positron deposited its energy and, through a thin lithium-containing screen, whether a neutron was captured next to it.

How the detector works

The detector holds 12,800 cubes of polyvinyltoluene scintillator, 5 cm on a side, arranged in five modules of ten planes, each plane a grid of 16 × 16 cubes. Each cube touches a sheet of ⁶LiF:ZnS(Ag). In inverse beta decay, the positron gives a fast scintillation signal in the plastic, while the neutron is captured on ⁶Li, producing an alpha particle and a triton that make the ZnS emit a much slower light pulse. The difference in pulse shape identifies neutrons with high purity, and the fine segmentation localises both signals. Light is collected by wavelength-shifting fibres running through the cubes and read by silicon photomultipliers.

Key results

The BR2 reactor at SCK CEN in Mol runs at 40 to 100 MW, with a compact core of highly enriched uranium. SoLid sat 6.3 to 8.9 m from it, under very little overburden. The analysis published in 2024 used 280 reactor-on days at a mean power of 55 MW and 172 reactor-off days, selecting 29,479 ± 603 antineutrino candidates, about 105 per day, at a signal-to-background ratio of 0.27. No oscillation was found; the data disfavour a small part of the reactor anomaly region at 90% confidence but are not sensitive to the Neutrino-4 claim.

Why it matters

SoLid showed that a highly segmented composite scintillator can work beside a reactor with almost no overburden, which is of interest for reactor monitoring and for future compact detectors.

Frequently asked questions

Why lithium-6 instead of gadolinium?

Neutron capture on ⁶Li gives a localised alpha and triton instead of a spread-out gamma cascade, so the capture point can be pinned to a single cube.

How does SoLid compare with STEREO and PROSPECT?

It reached lower sensitivity because of its higher background, but tested a quite different detector technology.

Original papers

  1. ProposalY. Abreu et al. (SoLid Collaboration), SoLid: a short baseline reactor neutrino experiment, JINST 16, P02025 (2021)arXiv:2002.05914
  2. Final resultY. Abreu et al. (SoLid Collaboration), Search for Very-Short-Baseline Oscillations of Reactor Antineutrinos with the SoLid Detector (2024)arXiv:2407.14382

Related terms

Latest research on this topic

Latest research

Last updated: · Editorial standard

Cite this page

Text

Neutrino Atlas (2026). “SoLid”. Retrieved 22 November 2026, from https://neutrino-atlas.com/terms/solid/

BibTeX

@misc{neutrinoatlas2026termssolid,
  title        = {SoLid},
  author       = {{Neutrino Atlas}},
  year         = {2026},
  url          = {https://neutrino-atlas.com/terms/solid/},
  note         = {Accessed 2026-11-22},
  language     = {english}
}