Neutrino Atlas
EN
  1. Comparisons

Reactor neutrinosvs.Accelerator neutrinos

Reactor vs. accelerator neutrinos: what is the difference?

In short

Reactors emit pure electron antineutrinos of a few MeV in all directions, as a free by-product. Accelerators make focused, pulsed beams of GeV muon neutrinos or antineutrinos. Reactor experiments measure disappearance; beams also reveal flavour appearance, CP violation and matter effects.

CriterionReactor neutrinosAccelerator neutrinos
ProductionBeta decays of fission fragmentsDecays of pions and kaons from proton collisions
FlavourPure ν̄eMostly νμ or ν̄μ, about 1 % νe
EnergyUp to about 10 MeVAbout 0.5 GeV to tens of GeV
EmissionIsotropic and continuousFocused, pulsed beam
IntensityAbout 2 × 10²⁰ ν̄e per second per GW (thermal)Set by proton beam power and focusing
Detection reactionInverse beta decay, threshold 1.8 MeVCharged-current scattering producing a muon or electron
Oscillation channelsν̄e disappearance onlyνμ disappearance and νe appearance
Typical baselinesAbout 1.6 km (θ₁₃), 52.5 km (JUNO)295 km (T2K), 810 km (NOvA), 1,300 km (DUNE)
Sensitivity to δCPNoneYes, by comparing neutrino and antineutrino modes

Two very different neutrino factories

A nuclear reactor is a source by accident. Fission splits uranium and plutonium into neutron-rich fragments, whose chains of beta decays release about six electron antineutrinos per fission, or roughly 2 × 10²⁰ per second for each gigawatt of thermal power. The flux costs nothing and cannot be switched off, but it spreads in all directions and falls with the square of the distance. An accelerator beam is built on purpose: protons strike a target, a magnetic horn focuses the charged pions and kaons produced, and these decay in a long tunnel into muon neutrinos. Reversing the horn current selects negative mesons and yields a muon-antineutrino beam instead. The beam arrives in short pulses, so detectors can ignore almost everything outside a window of a few microseconds.

What each source can measure

Reactor antineutrinos carry too little energy to create a muon, which requires more than 100 MeV. Reactor experiments therefore detect only electron antineutrinos, through inverse beta decay, and look for a deficit: a pure disappearance measurement. Because source and reaction are so clean, they reach high precision. Daya Bay and RENO measured θ₁₃ in 2012 at about 1.6 km, and KamLAND observed the solar oscillation at about 180 km. Beams have GeV energies, so muon neutrinos are identified directly and the appearance of electron neutrinos can be observed. Comparing neutrino and antineutrino modes over hundreds of kilometres makes beams sensitive to leptonic CP violation and to matter effects in the Earth.

The same physics on different scales

Oscillations depend on the ratio of distance to energy. The first oscillation maximum for |Δm²₃₁| ≈ 2.5 × 10⁻³ eV² lies near 0.5 km per MeV, so a reactor experiment reaches it within about 1.5 km, while a 1 GeV beam needs about 500 km. Both sources also have a place in history: reactor antineutrinos gave the first detection in 1956, and an accelerator at Brookhaven revealed the muon neutrino in 1962. Today the two approaches complement each other. JUNO measures reactor antineutrinos at 52.5 km with high precision, while long-baseline beams such as T2K, NOvA and DUNE add appearance and CP information that reactors cannot provide.

Read on

Related terms

Last updated: · Editorial standard

Cite this page

Text

Neutrino Atlas (2026). “Reactor vs. accelerator neutrinos: what is the difference?”. Retrieved 22 November 2026, from https://neutrino-atlas.com/comparisons/reactor-vs-accelerator-neutrinos/

BibTeX

@misc{neutrinoatlas2026orvsacceleratorneutrinos,
  title        = {Reactor vs. accelerator neutrinos: what is the difference?},
  author       = {{Neutrino Atlas}},
  year         = {2026},
  url          = {https://neutrino-atlas.com/comparisons/reactor-vs-accelerator-neutrinos/},
  note         = {Accessed 2026-11-22},
  language     = {english}
}