Magnetic horn
A pulsed toroidal magnet that focuses charged mesons of one sign into a forward beam.
Invented by Simon van der Meer in 1961, the horn carries a pulse current of several hundred kiloamperes synchronised with the proton spill, creating a toroidal field that focuses positive (or negative) mesons. Reversing the current polarity selects a neutrino or antineutrino beam, which is essential for CP-violation studies.
In plain words
Pions leave the target in a wide spray, and most would miss a distant detector. A magnetic horn is a lens for charged particles: a pair of nested metal tubes through which a huge current is pulsed for a few milliseconds. The magnetic field between the tubes bends particles of one charge back towards the beam axis and pushes the other charge away.
In detail
The current flows along the inner conductor and back along the outer one, so the field is toroidal, circling the axis, and exists only in the space between the conductors:
Because the field falls with radius, particles leaving at larger angles, which are typically lower in momentum, cross more field and are bent more strongly. The shape of the inner conductor, often like a horn or a parabola, is chosen so that a broad range of momenta is focused at once. Many beams use two or three horns in series.
In numbers
- NuMI: two horns, design current 205 kA, typically run at about 185 kA during MINOS, with a half-sine pulse of 2.3 ms.
- T2K: three horns, operated at around 250 kA.
- Each pulse is synchronised with a proton spill, so a horn experiences many millions of pulses per year, and mechanical fatigue and cooling set its lifetime.
History
Simon van der Meer invented the horn at CERN in 1961. Focusing increased the useful neutrino flux many times over and made possible the CERN experiments of the 1960s and 1970s, including Gargamelle. Van der Meer later shared the 1984 Nobel Prize with Carlo Rubbia for stochastic cooling, which enabled the discovery of the W and Z bosons.
Why it matters for neutrino physics
By selecting the sign of the focused mesons, the horn decides whether the beam consists mainly of neutrinos or antineutrinos. Reversing its current, described under horn polarity, is the basis of every accelerator search for leptonic CP violation.
Frequently asked questions
Why is the horn pulsed rather than run continuously?
A continuous current of hundreds of kiloamperes would melt the conductors. Because the protons arrive in short spills, the field is needed only for milliseconds, which keeps the average heating manageable.
Is the horn a superconducting magnet?
No. It is made of aluminium, which is light and conducts well, and it sits in an intense radiation field next to the target where superconductors could not operate. It is cooled by water sprays.
Original papers
- ProposalS. van der Meer, A directive device for charged particles and its use in an enhanced neutrino beam, CERN Report CERN-61-07 (1961)
Go deeper
- Neutrino vs antineutrino modeRunning the horn with forward or reverse current to make a νµ- or ν̄µ-dominated beam.
Related terms
Mentioned in 29 pages
Comparisons 1
Milestones 3
Terms 20
Last updated: · Editorial standard
Cite this page
Text
Neutrino Atlas (2026). “Magnetic horn”. Retrieved 22 November 2026, from https://neutrino-atlas.com/terms/magnetic-horn/BibTeX
@misc{neutrinoatlas2026termsmagnetichorn,
title = {Magnetic horn},
author = {{Neutrino Atlas}},
year = {2026},
url = {https://neutrino-atlas.com/terms/magnetic-horn/},
note = {Accessed 2026-11-22},
language = {english}
}