Accelerator neutrino beams
Neutrino beams made by firing protons onto a target and letting the resulting pions and kaons decay.
Protons (8–400 GeV) strike a graphite or beryllium target. Magnetic horns focus charged mesons of one sign, which decay in flight in a long decay pipe into muons and muon neutrinos (or antineutrinos). An absorber and the rock stop all particles except neutrinos. Such beams are nearly pure νµ (with about 1% νe), pulsed in time and controllable, making them ideal for long-baseline oscillation experiments.
In plain words
An accelerator neutrino beam is a factory with a production line hundreds of metres long. At one end, protons from an accelerator hit a target. In the middle, magnets gather the resulting particles and let them decay. At the end, a wall of steel and rock stops everything except the neutrinos, which carry on towards detectors that may be hundreds of kilometres away.
The production line
- Production target: graphite or beryllium that turns protons into pions and kaons.
- Magnetic horns: pulsed magnets that focus mesons of one charge; reversing them switches between neutrino and antineutrino mode.
- Decay pipe and absorber: a long tunnel in which the mesons decay, followed by a dump that removes the remaining hadrons and muons.
- Detectors: a near and far detector pair, often placed off-axis to narrow the energy spectrum.
- Bookkeeping: the delivered beam is counted in protons on target.
Facilities compared
- BNB at Fermilab: 8 GeV protons, about 0.8 GeV neutrinos, short baseline for MiniBooNE, MicroBooNE and SBND.
- J-PARC: 30 GeV protons, a 0.6 GeV off-axis peak for T2K and later Hyper-Kamiokande.
- NuMI: 120 GeV protons and a 675 m decay pipe, serving MINOS, MINERvA and NOvA.
- CNGS: 400 GeV protons from the CERN SPS, sending a high-energy beam to OPERA and ICARUS at Gran Sasso from 2006 to 2012.
- LBNF: the beam under construction for DUNE, designed for 1.2 MW and upgradable.
History
The first accelerator neutrino experiment, at Brookhaven in 1962, used 15 GeV protons without any focusing and showed that muon neutrinos differ from electron neutrinos (BNL two-neutrino experiment); Leon Lederman, Melvin Schwartz and Jack Steinberger received the 1988 Nobel Prize for it. Simon van der Meer's horn, proposed in 1961, multiplied the usable flux, and horn-focused beams at CERN fed the Gargamelle bubble chamber that discovered neutral currents in 1973.
Why it matters for neutrino physics
Accelerator beams are the only sources whose flavour, energy, timing and direction are all chosen by the experimenter. That control makes them the main tool for measuring δCP, the mass ordering via matter effects and θ₂₃, and for measuring cross sections in the GeV range. The limiting factor is usually the flux prediction, which depends on hadron production in the target.
Frequently asked questions
Why are accelerator beams pulsed?
The protons are extracted in short spills, a few microseconds long, once every one to a few seconds. Detectors only need to look during the spill, which suppresses cosmic-ray background by orders of magnitude.
What decides the neutrino energy of a beam?
Mainly the proton energy, the horn settings and the off-axis angle. A neutrino from pion decay carries at most about 43% of the pion energy, and the horns select which pion momenta reach the decay pipe.
Go deeper
- Production targetThe block of material hit by the proton beam to produce secondary mesons.
- Magnetic hornA pulsed toroidal magnet that focuses charged mesons of one sign into a forward beam.
- Decay pipe & beam absorberThe evacuated or helium-filled tunnel where mesons decay, and the dump that stops the remaining hadrons.
- Off-axis beam (facility)Placing a detector a few degrees away from the beam axis to obtain a narrow, lower-energy neutrino spectrum.
- Near and far detectorsA two-detector design that measures the beam before and after oscillation to cancel systematic uncertainties.
- Protons on target (POT)The total number of protons delivered to the target, the standard measure of accelerator exposure.
- Major neutrino beamlinesThe specific accelerator neutrino beams that have driven oscillation physics.
- Intrinsic beam contamination and wrong-sign backgroundThe unwanted electron-neutrino and opposite-sign neutrino components that every pion-decay beam carries along with its main flavour.
- NA61/SHINEA hadron spectrometer at the CERN SPS that measures particle production in targets used by accelerator neutrino beams.
Related terms
Mentioned in 14 pages
Milestones 1
Last updated: · Editorial standard
Cite this page
Text
Neutrino Atlas (2026). “Accelerator neutrino beams”. Retrieved 22 November 2026, from https://neutrino-atlas.com/terms/accelerator-beams/BibTeX
@misc{neutrinoatlas2026termsacceleratorbeams,
title = {Accelerator neutrino beams},
author = {{Neutrino Atlas}},
year = {2026},
url = {https://neutrino-atlas.com/terms/accelerator-beams/},
note = {Accessed 2026-11-22},
language = {english}
}