Neutrino Atlas
EN
  1. Terms
  2. Neutrino sources & facilities
  3. Accelerator neutrino beams
  4. Production target

Production target

ConceptLevel 3 of 4

The block of material hit by the proton beam to produce secondary mesons.

Targets must withstand megawatt beam powers. They are typically segmented graphite or beryllium cooled by water or helium. Hadron production measurements (NA61/SHINE, EMPHATIC) constrain meson yields and so reduce flux uncertainties.

In plain words

The target is where a neutrino beam begins. It is a rod or a row of fins, usually about a metre long and only a few centimetres wide, placed in the path of the proton beam. Every proton that hits a nucleus in it sprays out new particles, and the useful ones, charged pions and kaons, become the parents of the neutrinos.

Design requirements

  • Low atomic number: light materials such as graphite and beryllium produce pions efficiently while absorbing and scattering them little on the way out.
  • Length of about two nuclear interaction lengths, so most protons interact but secondary particles can still escape.
  • Narrow cross-section matched to the proton beam, so that pions leave through the sides and enter the horn field.
  • Resistance to heat, thermal shock and radiation damage, because each spill deposits kilojoules in a fraction of a second.

Real targets

NuMI uses segmented fins of fine-grained graphite, cooled by water; T2K uses a graphite rod about 90 cm long, cooled by helium, which sits inside its first horn; the Booster Neutrino Beam uses beryllium. Over years of running, radiation changes graphite's thermal conductivity and dimensions, so targets are replaced as beam power rises. The LBNF target for DUNE is being designed for 1.2 MW and beyond, one of the main engineering challenges of the facility.

Hadron production measurements

The number and momenta of pions and kaons leaving the target cannot be calculated precisely from first principles. Dedicated experiments therefore measure them. NA61/SHINE at the CERN SPS has recorded proton interactions on thin carbon targets and on a replica of the T2K target, and EMPHATIC at Fermilab measures hadron production at lower energies. These data were the main reason T2K's flux uncertainty dropped substantially, and they feed directly into the cross-section and oscillation analyses.

Why it matters for neutrino physics

Every neutrino in an accelerator experiment can be traced back to a collision in the target. Its material, shape and the hadron yields measured for it set the absolute flux and its uncertainty, which remain among the leading systematic errors in long-baseline experiments.

Frequently asked questions

Why not use a heavy metal like tungsten?

Heavy nuclei produce many pions but also reabsorb and scatter them strongly, and they heat up more per proton. Light materials give a better balance of production and escape, and graphite in particular tolerates high temperatures.

How long does a target last?

It depends on beam power. At megawatt-class facilities targets are designed for a few years of operation and can be exchanged remotely, because the area around them becomes highly radioactive.

Mentioned in 7 pages

Last updated: · Editorial standard

Cite this page

Text

Neutrino Atlas (2026). “Production target”. Retrieved 22 November 2026, from https://neutrino-atlas.com/terms/proton-target/

BibTeX

@misc{neutrinoatlas2026termsprotontarget,
  title        = {Production target},
  author       = {{Neutrino Atlas}},
  year         = {2026},
  url          = {https://neutrino-atlas.com/terms/proton-target/},
  note         = {Accessed 2026-11-22},
  language     = {english}
}