Neutrino Atlas
EN
  1. Terms
  2. Neutrino sources & facilities
  3. Accelerator neutrino beams
  4. Protons on target (POT)

Protons on target (POT)

ConceptLevel 3 of 4Also called: POT

The total number of protons delivered to the target, the standard measure of accelerator exposure.

Beam exposure is quoted in POT, for example T2K has accumulated a few times 10²¹ POT. Event counts scale with POT, detector mass and cross section. Beam power in MW and running time determine the POT accumulated.

In plain words

A reactor experiment measures its exposure in reactor power and time. An accelerator experiment counts protons: every proton that hits the target is a ticket in a lottery whose prize is a neutrino interaction in a distant detector. The total number of protons delivered, abbreviated POT, is therefore the basic unit of accumulated data.

From beam power to POT

POT per second = P / (Ep · e)P: beam power in watts; Ep: proton kinetic energy in eV; e: elementary charge, 1.602 × 10⁻¹⁹ C.

A 1 MW beam of 120 GeV protons, as planned for LBNF, delivers about 5 × 10¹³ protons per second, or roughly 5 × 10²⁰ POT in 10⁷ seconds of running. A beam of the same power at 30 GeV, as at J-PARC, delivers four times as many protons, but each produces fewer and lower-energy neutrinos. POT figures are therefore only comparable within the same beamline.

In numbers

  • J-PARC had delivered 2.0 × 10²¹ POT to T2K by 2017.
  • T2K's oscillation analysis published in 2021 used 3.13 × 10²¹ POT, 1.49 × 10²¹ in neutrino mode and 1.64 × 10²¹ in antineutrino mode.
  • Projections for DUNE and Hyper-Kamiokande are given in years at a planned beam power, which translate to several 10²¹ POT per mode.

How POT enters an analysis

The expected number of events in a far detector is proportional to the POT, the neutrino flux per proton at that location, the cross section, the detector mass and the selection efficiency. Beam monitors such as current transformers in front of the target count the protons in every spill to about a percent or better, so POT itself is among the best-known inputs. Doubling POT reduces the statistical uncertainty only by a factor of √2, which is why facilities invest heavily in beam-power upgrades.

Why it matters

POT is the common currency of accelerator neutrino physics: it is how experiments compare data sets, plan running between neutrino and antineutrino mode and quote their exposure.

Frequently asked questions

Why is exposure quoted in protons rather than neutrinos?

Protons can be counted directly and precisely in the beamline. The number of neutrinos produced per proton must be calculated from hadron production and focusing, and that calculation carries most of the flux uncertainty.

How long does it take to collect 10²¹ POT?

At a beam of several hundred kilowatts at 30 GeV, about one to two years of running. Planned upgrades towards and beyond 1 MW shorten this considerably.

Related terms

Mentioned in 21 pages

Last updated: · Editorial standard

Cite this page

Text

Neutrino Atlas (2026). “Protons on target (POT)”. Retrieved 22 November 2026, from https://neutrino-atlas.com/terms/protons-on-target/

BibTeX

@misc{neutrinoatlas2026termsprotonsontarget,
  title        = {Protons on target (POT)},
  author       = {{Neutrino Atlas}},
  year         = {2026},
  url          = {https://neutrino-atlas.com/terms/protons-on-target/},
  note         = {Accessed 2026-11-22},
  language     = {english}
}