Nuclear reactors as neutrino sources
Fission reactors emit enormous, nearly pure fluxes of MeV electron antineutrinos.
Neutron-rich fission fragments undergo beta decays, producing about six ν̄e per fission, or about 2 × 10²⁰ ν̄e per second per GW of thermal power. The flux is isotropic and switched on and off with reactor operation, which allows background measurements. Detectors use inverse beta decay with a 1.8 MeV threshold, and the spectrum peaks at about 4 MeV after folding with the cross section.
In plain words
A nuclear reactor is, among other things, a neutrino lamp that cannot be shaded. Every fission splits a heavy nucleus into two neutron-rich fragments, which settle down through a chain of beta decays, each releasing an electron antineutrino. The reactor operator never notices them, but for physicists a power plant is a free, enormous and well-documented source.
In numbers
At 1 km from a 1 GWth core this gives roughly 1.6 × 10⁹ antineutrinos per square centimetre per second. Detectors see them through inverse beta decay, ν̄e + p → e⁺ + n, which has a threshold of 1.8 MeV, so only the upper part of the spectrum is visible.
What makes reactors attractive
- Purity: essentially only ν̄e, so any deficit points directly to disappearance.
- Control: refuelling outages give reactor-off data that measure the background directly.
- Knowledge: thermal power is monitored to about a percent, and the fuel composition is tracked by the operator's core simulations.
- Choice of distance: detectors can be placed at about 10 m (research reactors), 1–2 km (θ₁₃), about 53 km (JUNO, solar mass splitting and mass ordering) or about 180 km (KamLAND).
Research and power reactors
Commercial power reactors burn low-enriched uranium and accumulate plutonium during a cycle, so their antineutrino spectrum changes over time. Research reactors with highly enriched fuel produce almost only ²³⁵U fissions and have compact cores, which suits short-baseline experiments such as STEREO and PROSPECT, at the cost of lower power.
History
The first detection of the neutrino, by Clyde Cowan and Frederick Reines in 1956, used antineutrinos from the Savannah River reactor (Cowan–Reines experiment). Reactors later provided the decisive measurement of θ₁₃ by Daya Bay, RENO and Double Chooz in 2012 and, through KamLAND, the confirmation of solar-neutrino oscillations with man-made particles.
Frequently asked questions
Can a reactor be switched off to measure background?
Yes, and experiments make use of this. Planned refuelling outages, which last weeks, provide reactor-off data. Multi-core sites rarely have all cores off at once, so the background is also estimated from detector data.
Could antineutrinos reveal what a reactor is doing?
In principle, yes. Because the spectrum changes as plutonium builds up, a nearby detector can follow the fuel composition. This is studied as a safeguards tool under reactor monitoring.
Go deeper
- Reactor antineutrino spectrum & fission fractionsThe energy distribution of reactor antineutrinos, set by the mix of ²³⁵U, ²³⁸U, ²³⁹Pu and ²⁴¹Pu fissions.
Related terms
Mentioned in 4 pages
Last updated: · Editorial standard
Cite this page
Text
Neutrino Atlas (2026). “Nuclear reactors as neutrino sources”. Retrieved 22 November 2026, from https://neutrino-atlas.com/terms/reactor-sources/BibTeX
@misc{neutrinoatlas2026termsreactorsources,
title = {Nuclear reactors as neutrino sources},
author = {{Neutrino Atlas}},
year = {2026},
url = {https://neutrino-atlas.com/terms/reactor-sources/},
note = {Accessed 2026-11-22},
language = {english}
}