Near and far detectors
A two-detector design that measures the beam before and after oscillation to cancel systematic uncertainties.
The near detector, hundreds of metres from the source, measures the unoscillated flux times cross section, while the far detector measures the oscillated spectrum. Taking ratios or extrapolating cancels much of the flux and cross-section uncertainty. This principle is used in accelerator experiments (K2K, T2K, MINOS, NOvA, DUNE) and reactor experiments (Daya Bay, RENO, Double Chooz).
In plain words
Measuring a change is easier than measuring an absolute amount. An oscillation experiment wants to know how a neutrino beam changes on its way, but the beam's starting intensity and the neutrinos' interaction probability are both uncertain by several percent or more. The solution is to measure twice: once close to the source, before oscillations have developed, and once far away. Most of what is unknown is common to both and drops out of the comparison.
In detail
The cancellation is best when both detectors use the same technology and target material, because then flux, cross section and detector response cancel almost entirely. A remaining complication is geometry: from the near detector the source looks extended, a reactor core or a decay pipe hundreds of metres long, whereas from the far detector it is effectively a point. This extrapolation is handled with simulation.
Examples
- K2K (1999–2004) pioneered the method for accelerator beams, with a near detector at KEK and Super-Kamiokande 250 km away.
- MINOS and NOvA built functionally identical near and far detectors, at about 1 km and 735 or 810 km.
- T2K uses a different technology at 280 m (ND280) than at the far site, so its near detector constrains flux and cross-section models rather than giving a direct ratio.
- Daya Bay operated eight identical detectors in near and far halls, reducing detector-related uncertainties to a fraction of a percent and measuring θ₁₃ in 2012; RENO and Double Chooz used the same principle.
Why it matters for neutrino physics
Without a near detector, flux and cross-section uncertainties of 5–10% or more would swamp the few-percent effects sought in precision oscillation measurements. The two-detector method turns an absolute measurement into a relative one and is the standard design of modern oscillation experiments.
Frequently asked questions
Why not put the near detector right next to the source?
It must be far enough that particles other than neutrinos have been absorbed and that the beam resembles what the far detector sees. At reactors this is tens to hundreds of metres; at accelerators it lies beyond the absorber and some rock.
Does the near detector see no oscillations at all?
For the standard three-neutrino oscillations it sees almost none, because the oscillations need much longer distances. That is exactly why it is used as the reference. A deficit already at the near detector would point to new physics such as sterile neutrinos.
Original papers
- MeasurementE. Aliu et al. (K2K Collaboration), Evidence for Muon Neutrino Oscillation in an Accelerator-Based Experiment, Phys. Rev. Lett. 94, 081802 (2005)DOI 10.1103/PhysRevLett.94.081802arXiv:hep-ex/0411038
Related terms
People
On the timeline
- 1999K2K starts the first long-baseline experiment
- 2006MINOS confirms muon-neutrino disappearance
- 2012Daya Bay discovers a non-zero θ₁₃
- 2012RENO confirms θ₁₃
- 2026SBND releases its first neutrino results
Mentioned in 46 pages
FAQ 1
Milestones 6
People 8
Terms 30
- 5 MeV bump
- Accelerator Long-baseline experiments
- Accelerator neutrino beams
- Analysis & measurement
- Baseline
- Calibration
- CDHS (WA1)
- CHOOZ
22 more
- Conventional neutrino beam
- Cross sections
- Cross-section & Nuclear-model uncertainty
- Daya Bay
- Detection efficiency & acceptance
- Disappearance measurement
- Double Chooz
- Intrinsic beam contamination and wrong-sign background
- LBNF (Long-Baseline Neutrino Facility)
- Major neutrino beamlines
- Mixing angle θ13
- NA61/SHINE
- Near-to-far extrapolation
- Nuclear models for neutrino scattering
- Off-axis beam (facility)
- Palo Verde
- Rate vs shape analysis
- Reactor antineutrino spectrum
- Reactor antineutrino spectrum & fission fractions
- Reactor antineutrinos
- Systematic uncertainty
- Tracking calorimeter
Last updated: · Editorial standard
Cite this page
Text
Neutrino Atlas (2026). “Near and far detectors”. Retrieved 22 November 2026, from https://neutrino-atlas.com/terms/near-far-detectors/BibTeX
@misc{neutrinoatlas2026termsnearfardetectors,
title = {Near and far detectors},
author = {{Neutrino Atlas}},
year = {2026},
url = {https://neutrino-atlas.com/terms/near-far-detectors/},
note = {Accessed 2026-11-22},
language = {english}
}