Neutrino Atlas
EN
  1. Terms
  2. Analysis & measurement
  3. Oscillation observables
  4. Near-to-far extrapolation

Near-to-far extrapolation

ConceptLevel 3 of 4

Using near-detector data to predict the far-detector spectrum in the absence of oscillation.

The near spectrum constrains the flux × cross-section product. After correcting for geometry and acceptance differences it predicts the far spectrum, so the oscillation signal is extracted with reduced systematic uncertainty. Methods range from simple ratios to joint fits of near and far data.

In plain words

If you want to know whether a river loses water on its way, you do not rely on a forecast of the rainfall upstream – you put one gauge near the source and another downstream. Neutrino experiments do the same. A near detector measures the beam before oscillation has had time to act, and its measurement is translated into a prediction for the far detector. Any shortfall or distortion at the far site is then attributed to oscillation, with most uncertainties about the source cancelling. The hardware is described under near and far detectors; this page is about the analysis step.

In detail

The event rate in any detector is the product of flux, cross section, detection efficiency and oscillation probability. The near detector measures the first three together. Extrapolation corrects for what differs between the sites: the geometric spread of the beam (a point-like source looks different from 1 km than from 800 km), different acceptances and target materials, and, for accelerator beams, the fact that the near detector sees neutrinos from a wider range of decay angles. Common methods are:

  • Far-to-near ratio: compare event counts directly, as Daya Bay did with eight functionally identical antineutrino detectors. Its 2012 result R = 0.940 ± 0.011 (stat) ± 0.004 (syst) gave sin²2θ₁₃ = 0.092 at 5.2σ.
  • Matrix or bin-by-bin extrapolation: use simulation to map each near-detector energy bin into far-detector bins, as MINOS and NOvA do with functionally identical detector designs.
  • Joint fits: constrain flux and cross-section parameters with near-detector data and propagate them to the far prediction, as T2K does with ND280, located 280 m from the target.

Limits of the method

Cancellation is never complete. Different energy spectra at the two sites, different detector technologies (T2K's ND280 is a tracker, Super-Kamiokande a water Cherenkov detector), and nuclear effects that bias the reconstructed energy differently all leave residual systematic uncertainties. DUNE's near-detector plan therefore includes a system that can move off the beam axis to sample different neutrino spectra (DUNE-PRISM).

History

K2K, sending neutrinos 250 km from KEK to Kamioka from 1999, was the first long-baseline experiment built around a near detector. Since then the near–far method has become standard for accelerator and reactor experiments alike.

Frequently asked questions

Why not just calculate the expected far-detector rate?

Neutrino fluxes from hadron production and interaction cross sections are uncertain at the 5–20 percent level, comparable to or larger than many oscillation effects. A near-detector measurement reduces these uncertainties substantially.

Must near and far detectors be identical?

Identical detectors give the cleanest cancellation, as at Daya Bay and NOvA, but they are not required. Joint fits can connect different technologies at the cost of larger residual uncertainties.

Related terms

Mentioned in 5 pages

Last updated: · Editorial standard

Cite this page

Text

Neutrino Atlas (2026). “Near-to-far extrapolation”. Retrieved 22 November 2026, from https://neutrino-atlas.com/terms/near-far-extrapolation/

BibTeX

@misc{neutrinoatlas2026ermsnearfarextrapolation,
  title        = {Near-to-far extrapolation},
  author       = {{Neutrino Atlas}},
  year         = {2026},
  url          = {https://neutrino-atlas.com/terms/near-far-extrapolation/},
  note         = {Accessed 2026-11-22},
  language     = {english}
}